Makes 560 grams
The addition of honey powder to this moisturizing lotion recipe lends anti-bacterial, anti-oxidant, and humectant properties. It also helps to remove impurities from the skin and pores, leaving the epidermis with a soft glow! Rice Bran oil also contains numerous anti-oxidants which are reputed to fight off free radicals that cause damage to the skin.
Ingredients:
Part A
5.5% Polawax 31 grams
2.5% Stearic Acid 14 grams
10% Apricot Kernel Oil 56 grams
6% Rice Bran Oil 34 grams
1% Honey Powder   6 grams
Part B
72% Water (Boiling Hot)   430 grams
Part C
1.5% Cromoist Oat Protein 8 grams
0.5% Vitamin E D-Alpha Tocopherol 3 grams
1% Germaben II Preservative 6 grams
2.5% Stearic Acid 14 grams
10% Apricot Kernel Oil 56 grams
6% Rice Bran Oil 34 grams
1% Honey Powder   6 grams
Part B
72% Water (Boiling Hot)   430 grams
Part C
1.5% Cromoist Oat Protein 8 grams
0.5% Vitamin E D-Alpha Tocopherol 3 grams
1% Germaben II Preservative 6 grams
Directions:
1. Measure out Part A into a microwave safe bowl and mix.
2. Slowly pour Part B into Part A, gently stirring to combine all ingredients. Continue stirring until all emulsifiers have melted and no solid flakes remain. Additional heating may be required.
3. Continue stirring every few minutes to ensure even cooling and emulsion.
4. Once product has reached below 45’ degrees add all of Part C.
5. Add fragrance oil or essential oil to desired scent level.
6. Stir well to ensure all ingredients are evenly dispersed, then package the product into bottles once it has cooled to be barely warm to the touch.
7. Product will not reach final thickness until completely cool.
1. Measure out Part A into a microwave safe bowl and mix.
2. Slowly pour Part B into Part A, gently stirring to combine all ingredients. Continue stirring until all emulsifiers have melted and no solid flakes remain. Additional heating may be required.
3. Continue stirring every few minutes to ensure even cooling and emulsion.
4. Once product has reached below 45’ degrees add all of Part C.
5. Add fragrance oil or essential oil to desired scent level.
6. Stir well to ensure all ingredients are evenly dispersed, then package the product into bottles once it has cooled to be barely warm to the touch.
7. Product will not reach final thickness until completely cool.